Each piece of wood in open unprotected left are signs of deterioration within a year or show Dom 'in the nature of the character of wear of materials that are non-living - and that includes pieces of wood your deck or fence shape. In this case, the light of the sun and rain are their most important tools. Wood exposed to sunlight outdoors makes it weak and gray as the rays of the sun is breaking its internal fibers. A similar division occurs when the wood absorbs water and makes it rainswell. The result is confusion. Morning dew and sunshine in the afternoon, then shrink-swell wood accelerate a daily cycle in motion the process of destruction. Deformation of the gray area, division, and loose nails are clear signs of difficulty in wood which elements are responsible.
The need to treat the wood
The wood can be, even if it was pressure treated, must still be cleaned and sealed to prolong its life. Bridges and fences to be pressure-treated wood still require regular cleaningand sealing, to ensure that they remain in good condition. While wood decks and fences pressure, cedar, cypress and other exotic woods are safe from infestations of insects, but they are not invulnerable to weather a corrosive effect. Timber, the protective layer can not represent a danger in just seven years.
When the wood is ready for sealing?
When is the right time to seal the wood? Some say that the wood must be sealed after one year, so that the wood is completely dry. However, aYears is a waiting period to seal the wood. Have suffered during this period, the wood would be too much damage, most of which can not be reversed. Wood can be completely dry and ready for sealing in two or three months. It turns out that there was wood, which is sealed within three months and is much more dirable looks better than wood, which was closed after a year. One can easily see if the wood is ready for sealing. Professionals with an electric moisture meter to determine if the woodbe sealed. However, a simpler method for spraying water droplets on the surface of the wood. When the water is absorbed rapidly, which means the wood is dry enough that it is ready for sealing.
Prepare the timber for sealing technology
The process begins with the preparation of the seal of the timber by means of cleaning. This most important phase of treatment for decks and fences would give the following results: a) removal of dirt, mold and algae, b) opening the pores of the wood, and c)PH Balance of the sealant can bond with each fiber. High pressure cleaner is the most common way to achieve this goal.
Choosing the right cleanser
The next step is to choose the right products to clean may not be as easy as it sounds. You must first draw attention to its complexity, it should be if the deck and fence cleaning compound acid, alkaline or neutral pH. The do-it-yourself market has a neutral pH and relatively safe use in powder detergents. MoreHardware stores, on the other hand, we recommend acid-based compounds because they are safer for the management of bases for the average home. Also happen to be much less effective. Most difficult to use alkaline detergent, the other side much more effective. Experienced entrepreneur, of course, know better. The most successful two phases of a process. Clean with an alkaline compound, then neutralize with an acid bleaching. This procedureallows the natural colors of "Spring" from inside the wood so that the bridge look great, even before it is closed. Professional-level Entrepreneurs cleaner industry, come from suppliers. The products offered by hardware stores and home stores are not up to this cleaner in terms of performance.
Power-wash wood
Atlanta is a cleaning option to remove the wooden bridge has burst with a jet of high pressure water mixed with or without detergent cleanersthe gray from wood, but can also damage the surface easily. Much water is needed for this technique, and it is important to exert the right pressure and the right kind of cleaning solution. Do-it-yourself need to protect against too much pressure. High-pressure cleaner, the owners have rented to develop a rule to spit water at 1750-3500 pounds per square inch (psi), which is fine for cleaning and removing old cement paint. However, theseHigh pressure cleaners are too strong for wood. The ideal amount of pressure is 500-800 psi. It is at this level of pressure, entrepreneurs with experience of working with wood rods adapted to their pressure washer. View High Pressure Cleaning Atlanta for more information. Another word of warning: Do not use hot water pressure washer on wood, as this great mar the wood by raising its grain.
Sealer selection type
Your deck is ready for all the poetry -bright and clean as a whistle. It 's time to choose a seal and decide how much you want to go for one. There are three types of sealers to choose from, each with distinctive characteristics of oil-based wax, and acrylic. Recently, latex-based sealers appeared on the market. The prices are wildly uneven in these product categories, and we recommend that "value for your money" as the ultimate guide for your purchasing decision. Expect disappointment at the outcome whenChoose a product cheaply.
Wax-based sealants
These seals are normally do-it-yourself shops, and are advertised on television. The manufacturers can afford to spend a fortune on advertising for these products because they are inexpensive to produce. We sell for less than $ 12 to $ 15 per gallon. The effects of poetry are relatively "short" period of 6-8 months, and if they are executed, usually black bridges. Wax-based sealers clean up with soap and waterWater. They are recognizable by the "friezes up" of water on the surfaces on which they were applied. In general, one can hardly not consider worth your time and money.
Oil-based sealants
Like their counterparts in wax, oil-based sealers clean up with soap and water. They are available in two formats - one from vegetable oils (such as linseed or tung oil) is derived, and the other from crude oil. Latter to better develop the wood, giving a soft natural look. Thevegetable-based varieties, on the other hand, provide a gloss on the wood surface and uniform film with a "paint". However, they contain starches and natural sugars, the growth of mold and mildew can be promoted. They are also very difficult to remove, and require stripping before the wood can be sealed again. This is particularly true of flax-type seal. One of the main advantages of oil-based product is that it must be removed before re-sealing of the rule. When it comes time toredo the fence or deck is a new level of the seal itself can be applied directly over the old gasket. But you can easily and seals about cost-based marks if you want. You should consider this a blessing added to the lower initial investment, you will keep your wood looking naturally beautiful. The oil-based sealants, the do-it-yourself retailers often have mixed in some vegetable oils They take between 12 and 18 months before re-closing will be purchasedrequired, which are shorter than the period of 24 months you can expect from commercial grade types. Oil-based sealants vary widely in quality and are between $ 15 and $ 30 per gallon prices.
No comments:
Post a Comment